The differences between A3 and A4 direct to film are mainly reflected in size, application scenarios, cost, etc. The following is a specific analysis: 1. Size difference A3 direct to film: The paper size is 297mm×420mm (width×height), which is twice…
DTF film mainly consists of the following layers: Base layer: This is the base layer of DTF film, usually made of PET (polyethylene terephthalate) film, which has good mechanical properties and stability. Release layer: This layer prevents the coating…
Understand the PET base, printable surface, release function, and back-side treatment of DTF film.
The side with ink-absorbing coating. DTF film should be printed on the side with ink-absorbing coating. This is because the side with ink-absorbing coating can better absorb ink, ensuring the printing effect and the durability of the pattern. DTF film…
The time for pressing DTF film is usually 10-15 seconds. The specific time may vary depending on the DTF film. The hot stamping temperature of the direct to film process is generally around 150-160 degrees, and the pressing time is…
Read time: 13 minutes The Experiment Nobody Warned You About Jenna already had a sublimation printer. She used it for mugs, mousepads, and light-colored polyester shirts. Business was decent. Then a customer asked for a custom design on a black…
DTF film cannot be reused. DTF film is a one-time use product. Once used, its stickiness will decrease and it cannot be firmly attached to clothing or other materials again. The design and use of DTF film also determine its…
Haiyi is a professional DTF film manufacturer, specializing in the production of various types of DTF film, and the products are shipped to various countries around the world. Welcome to order. Our product features: 1. Bright colors and high restoration…
DTF transfer is a subdivision of heat transfer, but there are obvious differences between the two in terms of technical principles, application scenarios and operation procedures. The following is a specific analysis: The relationship between DTF transfer and heat transfer…
A controlled test matrix for qualifying new DTF film batches before production.
DTF film is a substrate designed specifically for DTF printing, which uses the principle of thermal transfer to transfer patterns to fabrics or other materials. DTF film is usually made of PET material and has a multi-layer structure, including a…
A daily DTF film handling checklist for operators from storage through pressing.
