{"id":1595,"date":"2026-07-14T09:09:04","date_gmt":"2026-07-14T09:09:04","guid":{"rendered":"https:\/\/www.haiyidtf.com\/?p=1595"},"modified":"2026-07-14T09:11:32","modified_gmt":"2026-07-14T09:11:32","slug":"wholesale-dtf-film-roll-60cm-x-100m","status":"publish","type":"post","link":"https:\/\/www.haiyidtf.com\/pl\/wholesale-dtf-film-roll-60cm-x-100m\/","title":{"rendered":"Wholesale DTF Film Roll 60cm x 100m | Factory Direct PET Transfer Film Supply\u200b"},"content":{"rendered":"

Read time: 11 minutes<\/strong><\/p>\n

Why 60cm \u00d7 100m Is the Production Standard<\/h2>\n

Every upgrade in a DTF print shop follows the same path.<\/p>\n

It starts with A3 sheets \u2014 convenient, low commitment, easy to handle. Then volume grows. Sheets become inefficient: more changeovers, higher cost per transfer, more handling time per print. The move to roll format is inevitable.<\/p>\n

And when print shops make that move, they almost universally land on the same specification: 60cm \u00d7 100m<\/strong>.<\/p>\n

Sixty centimeters covers the print width of every major production-grade DTF printer. One hundred meters is long enough to reduce roll changes to a manageable frequency at production throughput. The format is not arbitrary \u2014 it is the result of the industry converging on what works at scale.<\/p>\n

This guide covers everything about wholesale sourcing of DTF film rolls in 60cm \u00d7 100m format: what to look for in the film itself, how pricing tiers work, how to evaluate a manufacturer versus a reseller, how to import, and how to build a supply relationship that keeps your production running month after month.<\/p>\n

\"Wholesale
Wholesale DTF Film Roll 60cm x 100m<\/figcaption><\/figure>\n

What Is a 60cm \u00d7 100m DTF Film Roll?<\/h2>\n

A 60cm \u00d7 100m DTF film roll<\/a> is a production-format roll of coated PET (polyethylene terephthalate) transfer film, 60 centimeters wide and 100 meters in length, wound on a standard core for use in roll-fed DTF printing systems.<\/p>\n

The 60cm dimension<\/strong> corresponds to the print width of production-grade DTF printers in the 24-inch class. This includes both dedicated production DTF printers and large-format systems converted or adapted for DTF use.<\/p>\n

The 100m length<\/strong> provides enough film to run a significant production session without a roll change. At typical A3-equivalent gang sheet length (approximately 42cm per sheet), a 100m roll yields approximately 238 gang sheet lengths \u2014 enough for several hours of continuous production on a mid-speed printer.<\/p>\n

The PET substrate<\/strong> is BOPET (biaxially oriented polyethylene terephthalate) \u2014 a dimensionally stable thermoplastic that maintains flat, consistent dimensions through the printer heat zone and into the pressing stage.<\/p>\n

The coating<\/strong> is the performance-critical element. Applied to the print side (and the back, for dual-matte film), the coating controls ink absorption precision, powder adhesion in printed areas, anti-static behavior in non-printed areas, and release force during film removal after pressing.<\/p>\n

This is the specification that separates a roll from a manufacturer with in-house coating technology from one that is simply reselling pre-coated generic PET with a label.<\/p>\n

Full Technical Specifications<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Specification<\/th>\nStandard Value<\/th>\nNotes<\/th>\n<\/tr>\n<\/thead>\n
Width<\/td>\n60 cm (600 mm)<\/td>\n\u00b11 mm edge tolerance<\/td>\n<\/tr>\n
Length<\/td>\n100 m<\/td>\n\u00b11 m<\/td>\n<\/tr>\n
Base substrate<\/td>\nBOPET (biaxially oriented PET)<\/td>\n<\/td>\n<\/tr>\n
Thickness options<\/td>\n75 micron \/ 100 micron<\/td>\n\u00b13 micron tolerance<\/td>\n<\/tr>\n
Front coating<\/td>\nInk-absorbing, controlled porosity, matte<\/td>\nProprietary formula at Haiyi<\/td>\n<\/tr>\n
Back coating<\/td>\nAnti-static matte<\/td>\nSurface resistance \u226410^10 \u03a9<\/td>\n<\/tr>\n
Coating weight<\/td>\n20\u201335 g\/sqm (\u00b13 g\/sqm tolerance)<\/td>\nBatch-tested<\/td>\n<\/tr>\n
Tensile strength<\/td>\n\u226535 N\/15mm (MD and TD)<\/td>\nPrevents tearing at production speed<\/td>\n<\/tr>\n
Release force (hot peel)<\/td>\n5\u201315 g\/cm<\/td>\n<\/td>\n<\/tr>\n
Release force (cold peel)<\/td>\n3\u201310 g\/cm<\/td>\n<\/td>\n<\/tr>\n
Anti-static surface resistance<\/td>\n\u226410^10 \u03a9<\/td>\nEliminates powder contamination<\/td>\n<\/tr>\n
Ink compatibility<\/td>\nWater-based DTF pigment ink (CMYK + white)<\/td>\n<\/td>\n<\/tr>\n
Core inner diameter<\/td>\n0.75 inch (19mm) or 1.0 inch (25.4mm)<\/td>\nSpecify when ordering<\/td>\n<\/tr>\n
Storage temperature<\/td>\n15\u201325\u00b0C (59\u201377\u00b0F)<\/td>\n<\/td>\n<\/tr>\n
Storage humidity<\/td>\n40\u201360% RH<\/td>\n<\/td>\n<\/tr>\n
Shelf life (sealed)<\/td>\n12\u201324 months<\/td>\nUnder correct storage conditions<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Variants: Peel Type, Coating, and Thickness Options<\/h2>\n

By Peel Type<\/h3>\n

Hot Peel<\/strong> Film is removed within 10 to 15 seconds of pressing while still warm. Fastest production cycle \u2014 no cooling wait between shirts. The release coating activates at elevated temperature, allowing clean separation.<\/p>\n

Best for: High-volume cotton and cotton-blend production with trained operators who consistently peel within the timing window.<\/p>\n

Cold Peel<\/strong> Film must cool completely (60 to 90 seconds minimum) before removal. The adhesive fully solidifies before film separation \u2014 cleaner edge definition, generally better wash durability, more forgiving of peel speed variation.<\/p>\n

Best for: Fine-detail designs, performance fabrics, and production environments where timing consistency across operators is difficult to maintain.<\/p>\n

Instant Hot Peel (Universal Peel)<\/strong> Engineered to release cleanly at any temperature \u2014 immediately after pressing, partially cooled, or fully cooled. Eliminates the timing dependency of standard hot peel.<\/p>\n

Best for: High-volume mixed-skill teams where consistent timing is difficult. Combines hot peel speed with cold peel forgiveness.<\/p>\n

By Thickness<\/h3>\n

75 Micron<\/strong> Better fine detail precision. Lower thermal resistance \u2014 more even heat penetration during pressing. Softer hand feel on finished transfers. More delicate \u2014 better suited for lower-tension feed systems.<\/p>\n

100 Micron<\/strong> More mechanically robust for high-speed, high-tension roll-fed production. Better dimensional stability under production printer feed mechanisms. Slightly less fine-detail precision than 75 micron.<\/p>\n

By Coating Configuration<\/h3>\n

Dual-Matte Anti-Static (Standard for Production)<\/strong> Ink-absorbing front coating + anti-static matte back coating. Eliminates powder contamination in non-printed areas. Required for any operation printing more than 20 transfers per day.<\/p>\n

Single-Sided Matte (Entry Level)<\/strong> Coating on print side only. Plain glossy PET back. Static charge attracts powder to non-print areas. Acceptable only for very low volume operations with manual sheet-by-sheet powder management.<\/p>\n

Why 60cm Width Matters for Production Economics<\/h2>\n

The move from 30cm (A3) to 60cm (24-inch) roll format is one of the most impactful cost reductions available to a growing DTF operation. Here is why the width matters.<\/p>\n

More Designs Per Linear Meter<\/h3>\n

A 60cm roll prints across a 60cm-wide surface. An A3 roll prints across a 30cm surface. At the same linear film usage, the 60cm roll produces twice the printable area. For a shop printing standard adult shirt front designs (approximately 25 to 30cm wide), a 60cm roll fits two designs side by side in the same linear meter that an A3 roll uses for one.<\/p>\n

Film cost per design: cut in half at equivalent price per meter.<\/strong><\/p>\n

Lower Handling Time Per Transfer<\/h3>\n

Wider rolls require fewer roll changes per production session. A 100m roll at 60cm width produces approximately 476 A4-equivalent gang sheets (at 42cm length). The same production output from 30cm rolls requires two roll changes. At production throughput, roll change time adds up significantly across a shift.<\/p>\n

Better Gang Sheet Utilization<\/h3>\n

Production-volume designs are easier to nest efficiently on a 60cm surface. Irregular design shapes that leave whitespace on a 30cm sheet often fit into that whitespace when the available width is doubled. Gang sheet efficiency targets of 85%+ are more achievable on 60cm format than on 30cm.<\/p>\n

Gang Sheet Efficiency on 60cm Rolls<\/h2>\n

Gang sheet efficiency \u2014 the percentage of the printable film area covered by actual design content \u2014 is the primary determinant of film cost per transfer. At 60cm width, the improvement potential versus 30cm format is significant.<\/p>\n

Example: Standard Full-Front Shirt Design (25cm \u00d7 35cm)<\/h3>\n

On a 30cm roll: one design per gang sheet row, with 5cm of wasted width. Efficiency: 83% of width used.<\/p>\n

On a 60cm roll: two designs per gang sheet row, with 10cm of wasted width split across both designs. Efficiency: 83% \u2014 same per-design waste, but two designs per meter.<\/p>\n

The net effect:<\/strong> Film cost per design is halved without changing design size, layout, or efficiency percentage.<\/p>\n

Example: Mixed Design Sizes (One Large + Two Small)<\/h3>\n

A 60cm gang sheet accommodates the mixed nesting that is impossible on 30cm format. A large back print (55cm \u00d7 40cm) occupies the left portion. Two hat designs (15cm \u00d7 12cm each) nest in the remaining width alongside the back print.<\/p>\n

Three designs per meter of 60cm roll. On 30cm format, the same three designs require two separate gang sheets \u2014 doubling film usage.<\/p>\n

Production target for 60cm format:<\/strong> 88%+ film utilization. Operations consistently achieving this target have the lowest possible film cost per transfer in the industry.<\/p>\n

Wholesale Pricing: What to Expect at Each Volume Tier<\/h2>\n

Factory-direct pricing for 60cm \u00d7 100m dual-matte DTF film from Chinese manufacturers:<\/p>\n\n\n\n\n\n\n\n\n\n
Monthly Volume<\/th>\nPrice Per Roll<\/th>\nPrice Per Meter<\/th>\nNotes<\/th>\n<\/tr>\n<\/thead>\n
5\u201320 rolls<\/td>\n$28\u2013$35<\/td>\n$0.28\u2013$0.35<\/td>\nNew account pricing<\/td>\n<\/tr>\n
20\u201350 rolls<\/td>\n$24\u2013$30<\/td>\n$0.24\u2013$0.30<\/td>\nStandard wholesale<\/td>\n<\/tr>\n
50\u2013100 rolls<\/td>\n$20\u2013$26<\/td>\n$0.20\u2013$0.26<\/td>\nEstablished account<\/td>\n<\/tr>\n
100\u2013300 rolls<\/td>\n$18\u2013$23<\/td>\n$0.18\u2013$0.23<\/td>\nHigh-volume tier<\/td>\n<\/tr>\n
300+ rolls<\/td>\n$16\u2013$20<\/td>\n$0.16\u2013$0.20<\/td>\nReserved capacity agreement<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Comparison with US distributor pricing for equivalent quality:<\/strong><\/p>\n\n\n\n\n\n\n\n\n
Source<\/th>\nPrice Per Roll (60cm \u00d7 100m)<\/th>\nAnnual Cost at 50 Rolls\/Month<\/th>\n<\/tr>\n<\/thead>\n
US retail<\/td>\n$45\u2013$60<\/td>\n$27,000\u2013$36,000<\/td>\n<\/tr>\n
US online distributor<\/td>\n$32\u2013$45<\/td>\n$19,200\u2013$27,000<\/td>\n<\/tr>\n
Factory-direct (new account)<\/td>\n$28\u2013$35<\/td>\n$16,800\u2013$21,000<\/td>\n<\/tr>\n
Factory-direct (established)<\/td>\n$20\u2013$26<\/td>\n$12,000\u2013$15,600<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

At 50 rolls per month, factory-direct sourcing from an established account saves $4,200 to $11,400 per year<\/strong> versus US online distributor pricing. This is the cost differential that justifies the logistics investment of direct China sourcing.<\/p>\n

Factory vs Distributor: The Sourcing Decision<\/h2>\n

Every US, regional, or online DTF film distributor is sourcing 60cm rolls from China. The question is whether you pay factory price or distributor price for the same film.<\/p>\n

What a Factory Provides That a Distributor Cannot<\/h3>\n

Coating formula control.<\/strong> A factory that developed its own coating formula can specify and guarantee coating weight, ink absorption rate, anti-static performance, and release force. A distributor resells what it received \u2014 it cannot specify or guarantee coating chemistry.<\/p>\n

Batch QC documentation.<\/strong> A real manufacturer tests every production batch: coating weight (g\/sqm), tensile strength (N\/15mm), release force (g\/cm), anti-static surface resistivity. These specific numerical values are available to wholesale accounts. A distributor cannot provide them.<\/p>\n

Technical troubleshooting.<\/strong> When production problems arise \u2014 inconsistent ink absorption, powder contamination, peel resistance \u2014 a coating manufacturer can diagnose at the chemistry level. A distributor can only suggest adjusting press settings.<\/p>\n

OEM capability.<\/strong> Custom packaging, custom widths, custom peel types, private label documentation \u2014 a manufacturer provides these. A distributor typically cannot.<\/p>\n

Price.<\/strong> Factory-direct eliminates distributor margin \u2014 typically 20 to 40% of the price you pay a distributor.<\/p>\n

When Distributor Sourcing Still Makes Sense<\/h3>\n